Leading 10 usual forklift crashes ， forklift procedure must take notice of these issues ！.

Leading 10 usual forklift crashes ， forklift procedure must take notice of these issues ！.

Blog Article

Do not ignore the forklift at the workplace. If the operation is not good, there will certainly be serious accidents in mins, and there are many mishaps including forklifts.

Case 1: The forklift freight obstructed the driver's sight, and the person ahead could not be discovered, leading to a moving crash.
Situation 2: In order to keep the equilibrium of the forklift when raising hefty goods, the employees used their body weight as the weight, which almost caused casualties.
Situation 3: The size of the forklift freight goes beyond the permitted size of the path and hangs on the roadside shelf, which almost triggers an accident.
Case 4: Forklift is speeding up and surrender throughout a turn.
Case 5: The forklift vehicle driver did not discover the pedestrian, and the pedestrian did not see the forklift.
Instance 6: The forklift raises the workers unlawfully, the forklift chauffeur does not use the seat belt, the forklift lifter falls and the chauffeur is squashed when the forklift surrender.
Situation 7: The forklift vehicle driver did not put on a seat belt and fell from the automobile when it rolled over and was crushed.
Forklift operation should pay attention to these matters ：.

Start.
1. Prior to beginning, observe the surroundings, and after verifying that there are no barriers that prevent the security of driving, honk the horn initially and afterwards start.
2. For cars with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale should be secure before beginning.
3. When the forklift begins with a load, the vehicle driver ought to first confirm that the lots is secure and dependable.
4. The begin must be slow-moving and steady.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the mast must be tilted in reverse. .
2. Do not raise the fork too expensive when driving. When going into and leaving the job website or while driving, beware that there will be no obstacles in the sky. When the lots is taking a trip, the fork needs to not be elevated too expensive, which will certainly impact the security of the forklift. .
3. After discharging, the fork ought to be lowered to the normal driving placement before driving. .
4. When transforming, if there are pedestrians or cars nearby, the driving signal ought to be released initially. High-speed sharp turns are prohibited. High-speed sharp turns will create the lorry to shed lateral security and tip over. .
5. When the forklift is downhill, it is purely prohibited to switch off the fire and slide, and it is restricted to brake all of a sudden while driving with loads unless there are unique situations.
6. When the forklift is running, it has to follow the website traffic rules in the manufacturing facility and have to keep a particular safety and security distance from the automobile ahead. .
7. When the forklift is running, the lots has to remain in the most affordable position that does not impede the driving, and the gantry needs to be appropriately tilted back. The lots will not be increased other than when piling or filling. .
8. The elevation of the lots must not obstruct the driver's sight. In special situations, when the item impacts the forward vision, drive at a low rate when turning around.
9. It is restricted to activate the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory location is 5 km/h, and it has to drive safely at a low speed when entering the production workshop location. .
11. When the forklift is lifted, raised or driven, it is prohibited for workers to base on the fork to hold products and play a balancing duty. .
12. If issues are found, they will be repaired and reported in a prompt way, and they will never operate Stand-on Electric Pallet Stacker with illnesses or conceal them.

loading and discharging.
1. When fork-loading items, the range between the two forks must be adjusted as required to make the load of both forks balanced and not skewed, and one side of the thing ought to be against the shelf. .
2. It is restricted to collaborate with a solitary fork or utilize a fork top or draw. In special conditions, security warning signs need to be set up to advise surrounding pedestrians. .
3. In the process of loading and dumping things, the forklift needs to be braked with the brake. .
4. The speed of the lorry must be slow and stable. Take care not to roll the wheels on the dunnage, so as not to extend the rolled items and injure individuals. .
5. When making use of a fork to fork the goods, the fork should be as deep as feasible under the load, and it must be noted that the fork suggestion must not touch other goods or items. The lots must be stabilized with marginal back tilt of the gantry to ensure that the tons does not slide in reverse. The pole can be tilted forward somewhat when the lots is lowered to enable very easy positioning of the load and removal of the forks. .
6. It is forbidden to fork products at high speed and hit hard objects with the fork head. .
7. When the forklift is working, it is prohibited for people to loaf the fork, so regarding stay clear of the collapse of the goods and hurt individuals. .
8. Overwhelming is prohibited, and it is banned to utilize forks to lift personnel to participate in high-altitude operations to avoid high-altitude falling accidents. .
9. It is not allowed to make use of the brake inertia to slip, place, round or roll items. .
10. It is not permitted to make use of forks to pick, transform pallet unload.

Leaving .
1. It is restricted to leave the forklift when the items on the fork impend. Before leaving the forklift, you have to unload the goods or reduced the fork structure.
2. Pull the parking brake handle to dead or dispirit the emergency brake button.
3. The engine is shut off and the power is cut off. (Except for unique conditions, such as the motorist does not leave the automobile's line of sight and does not surpass 1 min).
4. Remove the key. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance ought to be checked, and gas, lubricating oil and cooling water must be added.
2. Inspect the safety and security performance of starting, running and braking.
3. Examine whether the lights and horn signals are total and reliable.
4. Throughout the procedure of the forklift, check whether the stress and temperature level are typical.
5. After the forklift is running, the outside leakage should also be checked and the seals should be changed in time.

Forklift Safety Operation Specifications.
1. You have to inspect before leaving the vehicle;.
2. When you come across somebody in front of you throughout driving, you must send a signal at a distance of 5 m;.
3. The driving rate in the factory does not surpass 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The turning must not be also sharp to stop the tendency of "free turning";.
6. Running up and down the incline should be sluggish and consistent, and no turning on the incline is allowed.
7. Do not drive across the slope. When the gradient is higher than 10%, the lorry ought to be driven in reverse when declining;.
8. When the forklift workers bring the goods and progress, if they encounter big or heavy items and most likely to the chauffeur's line of sight, they must take the reversing exercise
.
The "Eight Prohibitions" must be complied with in the operation.
1. Solitary fork procedure is not permitted.
2. It is not allowed to lift the goods for far away driving.
3. It is not allowed to pick up the goods by turning over the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and various other harmful chemicals with forks.
5. It is not allowed to use inertia force to get the goods.
6. It is not permitted to use stopping force to exile round or easy-to-roll items.
7. It is not enabled to bring people to work with the pallet or fork, and it is purely restricted to stand under the fork after the fork is elevated.
8. Do not drive laterally on inclines
.
Car parking is not permitted under the list below problems.
1. Contours, narrow roads, railway crossings;.
2. Areas with a longitudinal incline more than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the section with the exact Electric Forklift Truck for Warehouse same size as the barrier need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844